PROTECTIVE
CLOTHING
Ziel FFS3000 Fire Suit
EN ISO 13688:2013+/A1:2021
EN 469:2020 X2 Y2 Z2 Level 2
EN 1149-5:2018
Marine Equipment Directive (MED) Module B
-
Outershell: Nomex® Outershell Tough 75 % Meta Aramid , 23 % Para Aramid , 2 % Antistatic
-
Moisture Barrier: FR fabric with high breathable Ply coated membrane Heat Barrier: Aramid felt quilted to AramidNiscose FR 50/50 inner liner Aramid Sewing Thread
-
Flame Retardant velcros
-
FR One way open panic quick release system
-
Aramid backing 5 cm yellow-grey-yellow reflective Tapes
-
Concealed zip front to neck
-
One radio pocket with flap, two side pocket with flap on jacket FR velcro fastener on wrist for adjustment.
-
Aramid knitted fabric cuffs
-
Front opening with a FR velcro and stud on front of trousers
-
Elasticated waist
-
Elastic and adjustable brace which are attached to the rear of the trousers waist
-
Two covered cargo pockets.
-
Support fabric layer on the knees
-
Two covered cargo pockets/Optinal
-
Support fabric layer on elbow and knees /Optional
Ziel FFS8500 Fire Suit
EN ISO 13688:2013 EN 469:2005 Xf2 Xr2 Y2 Z2 Level 2
-
Outershell: Nomex® 3DP
-
Moisture Barrier: FR fabric with high breathable PU coated membrane
-
Heat Barrier: Aramid felt quilted to Aramid/Viscose FR 50/50 inner liner
-
Aramid Antiwicking tape
-
Aramid Sewing Thread, Flame Retardant velcros
-
FR One way open panic quick release system
-
Aramid backing 5 cm yellow-grey-yellow reflective Tapes
-
Aramid backing 1 cm Photoluminescent Tapes
-
Concealed zip front to neck
-
One chest pocket, one radio pocket with flap, two side pocket with flap on jacket
-
FR velcro fastener on wrist for adjustment
-
Ergonomically shaped elbows
-
Para Aramid knitted fabric cuffs
-
Support fabric layer and pad on elbow, shoulder andd knees
-
Front opening with a FR velcro and stud on front of trousers
-
Elasticated waist
-
Elastic and adjustable brace which are attached to the rear of the trousers waist
-
Two covered cargo pockets
-
Ergonomically shaped knees
Ziel FFS9000 Fire Suit
EN 469:2005 Xf2 Xr2 Y2 Z2 Level 2
-
Outershell: PBO®, Aramide, Antistatic FFS9000
-
Moisture Barrier: %100 Aramid nonwoven with high technology PU membrane
-
Inner Liner: Aramid/Viscose FR 50/50 Ripstop inner liner
-
Aramid Antiwicking tapes
-
Aramid Sewing Thread
-
Flame Retardant velcros
-
FR One way open panic quick release system
-
Aramid backing 5/7,5 cm yellow-grey-yellow reflective tapes
-
Concealed zip front to neck
-
One radio pocket with flap, two side pocket with flap on jacket
-
FR velcro fastener on wrist for adjustment
-
Ergonomically shaped elbows
-
Aramid based reinforcements on elbows and knees
-
Aramid knitted fabric cuffs
-
Front opening with a zipper and stud on front of trousers
-
Elasticated waist
-
Ergonomically shaped knees
-
Elastic and adjustable brace which are attached to the rear of the trousers waist
-
Zipper on ankle
Kermel Vulcan A90 Fire Suit
(ETF2044NK/ETF2045NK)
Kermel A90 consists of 99% meta-aramid & 1% antistatic The Vulcan A90 is Eagle’s entry level fire suit which provides many features you would expect to see in a premium product. There is no compromise in terms of safety or quality to meet the new higher standard EN469:2020.
Vulcan A90 – No Compromise
-
Excellent colour fastness (wash & light fastness)
-
No pilling: permanently looks good
-
Optimal wearing comfort
-
Above average dimensional stability – even after frequent washing
-
Permanent flame retardancy, non-melting, non dripping
-
No breaking of the fabric after contact with flame
-
No afterburning & afterglow after removing the flame
Kermel CoreFX Fire Suit
(ETF2044KX2/ETF2045KX2)
Eagle Technical Products are a world leader in firefighter clothing. The Core FX suit offers the very latest in technical solutions and ergonomic designs. Constructed with new technology which withstands double flashover testing. Futura liner system providing exceptional moisture management. High levels of breathability – Low RET score and superb UV protection.
Jacket
-
Perforated yellow/silver/yellow breathable reflective tape
-
10mm DT Lite tape for visiblity in the dark
-
Front fastening heavy duty panic zipper
-
Sleeves with full underarm gusset for freedom of movement
-
Erognomic elbows with Kevlar® padding & reinforcement
-
Reinforced shoulders plus Kevlar® & SpaceTec padding
-
Radio pocket, torch loops and microphone loops
-
Large hip pockets with glove loop in pockets
-
Action back for increased movement
Trouser
-
Yellow Silver Yellow perforated breathable reflective tape
-
10mm DT Lite tape for visiblity in the dark
-
Front fastening fly with heavy duty zipper
-
Lumber support with SpaceTec® padding
-
Ergonomic knees with Kevlar® padding & reinforcement
-
Reinforced hems and inner ankles
-
Fully adjustable & removeable comfort brace
Wildland firefighting Suit SC 530
Suit composed by Jacket and Trousers in meta-aramid Rip Stop (tearproof) IOR (hydro repellent oil) fabric; composition: 93% meta-aramid 5% para-aramid 2% antistatic fiber of 185 g/mq ca. Oeko-tex®.
Jacket SC530
-
Set-in sleeves, bottom of the sleeves with slit and wrist fastened by Velcro® F.R.
-
Stand-up collar with a back neck protection, closed by Velcro® F.R.
-
Front closure with divisible brass zip
-
N. 2 front welt pockets fastened by Velcro® F.R.
-
Elastic flame-blocking waistband
-
Reflective certified stripes in yellow F.R. colour on the chest, on the back and on the forearms.
Trousers SC530
-
Zip high 5 cm., elastic on the back and loop of 6 cm.
-
N. 2 french pockets with protection flap closed by Velcro® F.R.
-
N. 2 bellows pockets applied on the hips and closed with Velcro ® F.R.
-
N. 1 pocket on the back right side closed by flap
-
Front flap with closure in brass zip protected by gusset
-
Opening on the bottom of the leg closed by zip, cover boots gaiter with elastic for ankle tightening
-
Knee reinforcement by padding
-
Yellow reflective stripes certified F.R. on the bottom of the leg
The suit is entirely sewn with NOMEX® sewing threads and the main seams are with two needles.
EURO XVI Wildland fire suit
ISO Standard 16073-3: 2019
"Personal Protection Equipment to Combat Wildfires"
ISO Standard EN 15384: 2020
“Protective clothing for wildfire firefighters”
Napoleon-style pockets.
- Straps for fastening elements on the chest.
- The front zipper can be quickly released if needed.
- The back is longer, which forms a penguin-type tail.
EURO XVI Wildland fire pants
- Adjustment system for a better fit to the body.
- Hems: Velcro fastening system, so they can be worn tight or loose.
- Reinforcement in the areas of greater friction
- Triple seams with an anti-hook design.
Made of rip-stop fibric composed of 93% meta-aramids, 5% para-aramids, and 2% anti-static (carbon fiber).
Eagle ETF6NKV
Eagle Technical Products are world leaders in the design and production of fire protective flash hoods. The Eagle ETF6NKV hood features a Kermel® Viscose outer and lining fabric giving the wearer maximum protection. With a full shoulder design to allow the hood to be worn under the fire trouser braces. Offering additional protection across the chest and shoulders for extreme comfort and fit. The unique Eagle design hood features two totally flat crushed seams.
Features
-
Innovative design to ensure that the seams are comfortable.
-
Elasticated face opening.
-
Designed to work alongside other PPE.
-
The fabrics are designed in a rib design for additional comfort and stretch using a warp knitted fabric for superior fit and comfort.
Ziel Firefighter Hood - BTS H5000
Aramid based flame retardant anti-static knitted fabric.
Two Layers.
Comfortable to wear.
EN 13911:2017
EN 1149-5:2018
IEC 61482-2:2018 APC=2
Sizes: One size fits all
